ApplianceRepairman.us 1-833-563-1092

Dryer Repair Near You

Dryer repair near you starts with one call to 1-833-563-1092. Share your ZIP code and the problem, and your call is routed to an independent local dryer repair pro. Fixr puts most dryer repairs between $100 and $200. Help covers Whirlpool, GE, Samsung, LG and other major brands.

Free referral service. Have your ZIP code ready so your call reaches a provider near you.

Last updated October 2026
Dryer repair
At a glance

Dryer repair key facts

Dryer repair fixes problems that stop your dryer from heating, tumbling or shutting off right. Most issues come from a blown thermal fuse, a broken heating element or gas igniter, a worn drive belt or idler pulley, or a blocked vent. A technician tests these parts with a meter and replaces only what has failed.

Typical cost
$100 – $200 (about $150 average) (Fixr)
Average life
About 14 years (NAHB)
Common parts
thermal fuse, heating element, gas igniter, gas valve coils
Urgent if
you smell burning or see scorch marks
Phone
1-833-563-1092
Warning signs

What are the signs my dryer needs repair?

Small problems tend to get worse and more expensive the longer they wait. If you notice any of these, book a repair.

  • Clothes are still damp after a full cycle
  • The outside of the dryer gets very hot
  • A burning smell when it runs
  • Squeaking or grinding while tumbling
  • The drum does not turn at all
  • Lint builds up around the door
  • The vent flap outside does not open
  • It hums but will not start
Causes

What are the most common dryer problems?

These are the faults technicians see most, and what usually causes them.

Dryer runs but no heat

Blown thermal fuse, burned-out heating element on electric models, or a failed igniter or gas valve coil on gas models.

Drum will not turn

A broken drive belt, a seized idler pulley, or a failed motor.

Takes two or more cycles to dry

A clogged vent line, a weak heating element, or a faulty cycling thermostat.

Loud squealing or thumping

Worn drum rollers, a worn idler pulley, or a damaged belt.

Dryer will not start

A bad door switch, start switch, thermal fuse or tripped breaker.

Dryer shuts off early

Overheating from poor airflow or a failing moisture sensor.

Step-by-step troubleshooting: Dryer Not Heating: Causes and What to Do

Need dryer repair today?

Call 1-833-563-1092. Have your ZIP code ready.

Call 1-833-563-1092
The process

How is a dryer repaired?

  1. Diagnose. The technician will check airflow, then test the thermal fuse, thermostats, heating element or igniter, belt and motor.
  2. Quote. You get the price for parts and labor before any work starts.
  3. Repair. The failed part is replaced, often on the same visit if it is on the truck.
  4. Test. The dryer is run to confirm the fix.
  5. Prevent. Ask what caused the failure and how to keep it from happening again.

How long does it take? Many dryer repairs are finished in one visit when the part is on hand. Special-order parts add a return trip once the part arrives.

Parts and terms

Dryer parts and terms technicians use

Knowing these words helps you describe the problem and understand the quote.

thermal fuseheating elementgas ignitergas valve coilsflame sensorcycling thermostathigh-limit thermostatdrive beltidler pulleydrum rollersdrum glidesdoor switchmoisture sensordryer ventlint screengas dryerelectric dryer240-volt outlet
Pricing

How much does dryer repair cost?

Fixr puts most dryer repairs between $100 and $200, with a national average of about $150. Expect a service call fee of about $50 to $100, which many providers apply to the repair.

Cost depends on the part that failed, the brand, labor time and whether a part must be ordered. Read the dryer repair cost guide.

SourceWhat they report
Fixr$100 – $200 (about $150 average)
HomeAdvisor$100 – $400
Thumbtackabout $170 average
This Old House$100 – $650 (washers and dryers combined)

Common dryer part costs

RepairCost range
Heating element replacement (electric)$150 – $350
Igniter replacement (gas)$100 – $250
Belt replacement$150 – $250
Drum roller replacement$100 – $150
Motor replacement$250 – $450
Vent replacement$75 – $150

Source: Fixr.

Right now

What should I do while I wait?

  1. Stop using the dryer if you smell burning or it runs with no heat.
  2. Clean the lint screen and pull the vent hose to check for clogs.
  3. The U.S. Fire Administration lists failure to clean as the leading cause (34%) of home dryer fires.
  4. If you smell gas, leave the home and call 911 and your gas utility from outside.
  5. Write down the model number from the door frame or back panel.
Before you call

Quick checks you can do safely

  1. Clean the lint screen before every load.
  2. Disconnect and clear the vent hose behind the dryer.
  3. Check the outside vent flap opens when the dryer runs.
  4. For electric dryers, check both breakers. Many need a double breaker.
DIY vs. pro

Can I fix my dryer myself?

Some fixes are safe for homeowners. Others need training, tools or certification.

TaskDIY?Why
Clean the lint screen and ventYesThe single best fire-prevention step.
Replace a thermal fuse on an electric dryerMaybeSimple part, but the cause of overheating still needs fixing.
Gas igniter or gas valve coilsProInvolves the gas line.
Motor, drum or control boardProHeavy parts and wiring diagnosis.
When to call

When should I call a dryer repair pro?

  • You smell burning or see scorch marks
  • You smell gas near a gas dryer
  • The dryer gets very hot to the touch
  • The breaker trips when it starts
  • Quick checks did not fix the problem
What to expect

What happens when I call?

  1. You call 1-833-563-1092. There is no charge for the referral.
  2. You give your ZIP code, the brand and the problem.
  3. Your call is routed to an independent provider who serves your area.
  4. The provider explains their fees and sets a visit.
  5. After a diagnosis, you approve the price before work starts.
Repair or replace

Is it worth repairing my dryer?

NAHB data puts the average life at about 14 years. A common rule of thumb: repair if the dryer is under half its expected life and the repair costs less than half the price of a new one.

Work through the repair-or-replace guide.

WhirlpoolGESamsungLGMaytagFrigidaireKitchenAidBoschKenmoreElectroluxAmanaSub-Zero

Dryer repair questions

Why is my dryer running but not heating?

On electric dryers the most common cause is a blown thermal fuse or heating element. On gas dryers it is usually the igniter or gas valve coils. A blocked vent often causes the fuse to blow, so the vent should be cleaned too.

Is a clogged dryer vent dangerous?

Yes. Lint is highly flammable and a blocked vent makes the dryer overheat. Clean the lint screen every load and have the vent line cleared at least once a year.

Can technicians repair gas dryers?

Yes. Technicians in our network work on both gas and electric dryers. If you ever smell gas, leave the house and call 911 and your gas company first.

How long does a dryer repair take?

Many dryer repairs are finished in a single visit, because belts, fuses and igniters are common parts that technicians often carry. Control boards and motors may need to be ordered.

Is it worth fixing an old dryer?

Dryers are simple machines with an average life of about 14 years, according to NAHB data. Most repairs cost a fraction of a new dryer, so repair is usually worth it unless the drum or cabinet is badly damaged.

What is a thermal fuse?

It is a small safety part that cuts power to the heat or motor if the dryer gets too hot. When it blows, it must be replaced, and the cause of the overheating should be fixed.

Get your dryer working again

Call 1-833-563-1092 with your ZIP code to speak with a local dryer repair pro.

1-833-563-1092

Free referral service. Have your ZIP code ready.

Tap to call — 1-833-563-1092